1. The barrels stacked on the pallet are packed and fixed with wrapping film. When packing, the extrusion deformation between the barrel and the barrel should be avoided, and the deformation amount should be ≤5%; When the upper and lower layers should be aligned, the weight of the upper layer should be evenly applied to the lower layer; the ground at the stacking place should be flat and in a horizontal position.

2. The buckets after packing the goods are stacked on double-sided flat pallets, and the pallet size is not more than 1.3 meters; each pallet can be stacked at most 1 layer, the number of stacked buckets is determined by the size of the pallet, and the edge of the bucket must not exceed the pallet edge; The upper buckets should be stacked symmetrically so that the center of gravity of the entire pallet and its upper bucket is in the center of the pallet.

3. The storage shelf life of barrels is 2 years from the date of production.

4. The barrels should be stored under awning to avoid exposure to sunlight, and the storage temperature should be below 40°C and above -18°C.